Publications

Selected Peer-Reviewed Articles

Islam, AKM A., and Poudel, B. (2018). “Corrosion in the Substructure of a Pedestrian Bridge at YSU: A Case Study.” Structures Congress 2018: Bridges, Transportation Structures, and Nonbuilding Structures, doi:10.1061/9780784481332.010, pp.111-124.

Islam, AKM A., and Phillips, D. (2016). “An Experimental Analysis of a Timber Howe Truss.” Structures, Elsevier, December 2016, Vol. 10C, pp. 39-48; doi: 10.1016/j.istruc.2016.12.003.

Islam, AKM A., Jaroo, A. S., and Li, F. (2015). “Bridge Load Rating Using Dynamic Response.” ASCE Journal of Performance of Constructed Facilities, August 2015, Volume 29, No. 4.

Islam, AKM A., Dempsey, P. J., Feldman, J., and Larsen, C. (2014). “Characterization and Comparison of Vibration Transfer Paths in a Helicopter Gearbox and a Fixture Mounted Gearbox.” NASA Technical Memorandum, NASA/TM – 2013-216586, NASA Glenn Research Center, Cleveland, Ohio.

Islam, AKM A., Dempsey, P. J., Feldman, J., and Larsen, C. (2014). “Characterization of vibration transfer paths in nose gearboxes of an AH-64 Apache.” Proc. SPIE. 9061, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2014, 90610Q. (March 08, 2014) doi: 10.1117/12.2041309.

Islam, AKM A., Li, F., Hamid, H. F., and Jaroo, A. S. (2014). “Bridge Condition Assessment and Load Rating using Dynamic Response.” Transportation Research Board, FHWA/OH-2014/7.

Islam, AKM A., Hamid, H. F., and Li, F. (2014). “Bridge condition assessment from dynamic response collected using wireless sensor networks.” Proc. SPIE 9064, Health Monitoring of Structural and Biological Systems 2014, 90640B (March 9, 2014); doi:10.1117/12.2044265.

Islam, AKM A., Jaroo, A. S., and Li, F. (2014). “Bridge load rating from dynamic response collected using wireless sensor networks.” Proc. SPIE 9064, Health Monitoring of Structural and Biological Systems 2014, 90640C (March 9, 2014); doi:10.1117/12.2044266.

Dempsey, P. J., Islam, AKM A., Feldman, J., and Larsen, C. (2013). “Investigation of Gearbox Vibration Transmission Paths on Gear Condition Indicator Performance.” NASA Technical Memorandum, NASA/TM – 2013-216617, NASA Glenn Research Center, Cleveland, Ohio.

Islam, AKM A., and Shukla, A. (2013). “Reducing Bumps at Pavement-Bridge Interface.” New Developments in Structural Engineering & Construction, Research Publishing, Vol. 1, pp. 511-516.

Islam, AKM A., and Rahman, ABM M., & Li, F. (2013). “Service Life Assessment of a Bridge from Dynamic Response Collected using Wireless Sensors.” New Developments in Structural Engineering & Construction, Research Publishing, Vol. 1, pp. 533-538.

Islam, AKM A., Li, F., and Kolli, P. K. (2011). “Structural Health Monitoring of Bridges using Wireless Sensor Network.” Performance, Protection and Strengthening of Structures under Extreme Loading, Applied Mechanics and Materials, Vol. 82 (2011), July, pp. 796-803.

Islam, AKM A. (2009). “Effective Methods of using CFRP Bars in Shear Strengthening of Concrete Girders.” Engineering Structures, Elsevier, Vol. 31, No. 3, March, pp. 709-714.

Islam, AKM A., and Yazdani, N. (2008). “Hurricane Damage Assessment for Residential Coastal Structures.” International Journal of Ecology and Development, Special Volume on Coastal Environment: Coastal Structures, Vol. 11, No. F08, pp. 51-70.

Islam, AKM A., and Yazdani, N. (2008). “Performance of AASHTO Girder Bridges under Blast Loading.” Engineering Structures, Elsevier, Vol. 30, No. 7, July, pp. 1922-1937.

Islam, AKM A., and Yazdani, N. (2006). “Blast Capacity and Protection of AASHTO Girder Bridges,” ASCE Forensic Engineering, October, pp. 311-326.

Islam, AKM A., and Yazdani, N. (2002). “Post-Storm Model for Reconstruction of Habitable Coastal Structures.” ASCE Journal of Performance of Constructed Facilities, August 2002, Volume 16, No. 3, pp. 129-138.

Selected Peer-Reviewed Presentations

Islam, AKM A., and Poudel, B. (2018). “Corrosion in the Substructure of a Pedestrian Bridge at YSU: A Case Study.” Structures Congress 2018, Fort Worth, Texas, April 19-21.

Li, F. X., Islam, AKM A., Jaroo, A. S., Hamid, H., Jalali, J., and Sammartino, M. (2015). “Urban highway bridge structure health assessments using wireless sensor network.” Wireless Sensors and Sensor Networks (WiSNet), IEEE Topical Conference, San Diego, California. DOI: 10.1109/WISNET.2015.7127417.

Islam, AKM A., Jaroo, A. S., and Li, F. (2014). “Bridge load rating from dynamic response collected using wireless sensor networks.” SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, San Diego, California, March 9-13, 2014.

Islam, AKM A., Hamid, H. F., and Li, F. (2014). “Bridge condition assessment from dynamic response collected using wireless sensor networks.” SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, San Diego, California, March 9-13, 2014.

Islam, AKM A., Dempsey, P. J., Feldman, J., and Larsen, C. (2014). “Characterization of vibration transfer paths in nose gearboxes of an AH-64 Apache.” SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, San Diego, California, March 9-13, 2014.

Islam, AKM A., and Shukla, A. (2013). “Reducing Bumps at Pavement-Bridge Interface.” The Seventh International Structural Engineering and Construction (ISEC-7) Conference, Honolulu, Hawaii, June 18-23.

Islam, AKM A., and Rahman, ABM M., & Li, F. (2013). “Service Life Assessment of a Bridge from Dynamic Response Collected using Wireless Sensors.” The Seventh International Structural Engineering and Construction (ISEC-7) Conference, Honolulu, Hawaii, June 18-23.

Islam, AKM A., Li, F., and Kolli, P. K. (2011). “Structural Health Monitoring of Bridges using Wireless Sensor Network.” invited paper at the PROTECT2011 Conference, August 30 – September 1, 2011, Lugano, Switzerland.

Islam, AKM A., and Shukla, A. (2010). “Causes of Bumps at Pavement-Bridge Interface.” Ohio UTC Student Research Conference, November 8, 2010, University of Akron, Akron, Ohio. Received “Best in the Conference” award.

Islam, AKM A., Li, F., and Kolli, P. K. (2010). “Monitoring Structural Health of a Bridge using Wireless Sensor Network,” Structures Congress 2010, May 12-14, Orlando, Florida. pp. 3634-3644, (doi : 10.1061/41130(369)328).

Li, F., Islam, AKM A., Perera, G., and Kolli, P. K. (2010). “Real-time Urban Bridge Health Monitoring Using a Fixed Wireless Mesh Network.” IEEE Radio and Wireless Symposium, January 10-14, 2010, New Orleans, LA.

Islam, AKM A., and Yazdani, N. (2009). “Performance and Protection of Highway Bridges under Blast Load,” invited paper presented and published at the PROTECT2009 Conference, August 19-21, 2009, Hayama, Japan.

Islam, AKM A. (2009). “Contribution of NSM CFRP Bars in Shear Strengthening of Concrete Members,” The Fifth International Structural Engineering and Construction Conference (ISEC-5), Las Vegas, Nevada, September 21-27.

Islam, AKM A. (2009). “Effects of NSM CFRP Bars in Shear Strengthening of Concrete Members,” poster presentation, Structural Engineering Institute, 2009 Structures Congress, Austin, Texas, April 30- May 2. doi:10.1061/41031(341)289.

Islam, AKM A., and Yazdani, N. (2008). “Impact of Blast Load on AASHTO Girder Bridges,” invited paper presented at the First American Academy of Mechanics Conference, June 17-20, New Orleans, Louisiana.

Islam, AKM A., and Yazdani, N. (2006). “Effect of Blast Loading on AASHTO Type Highway Bridges,” Structures Congress 2006, May.

Islam, AKM A., and Yazdani, N. (2006). “Blast Capacity and Protection of AASHTO Girder Bridges,” ASCE 4th Forensic Congress, October, pp. 311-326.

Islam, AKM A., and Yazdani, N. (2001). “Post-Storm Model for Reconstruction of Habitable Coastal Structures,” Presented in the International Conference on Engineering for Ocean and Offshore Structures and Coastal Engineering Development, Singapore, December 18-20.